Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/29/d134578137/htdocs/wp-includes/post-template.php on line 284

I am having a hard time trying to figure what code I should be running…I got a 3550 to play with. The blueprint says 12.2 IP Services, but on cisco.com you cannot download any 12.2 IP services IOS images that are EMI. The latest EMI I can pull is 12.1(22) (c3550-i5k2l2q3-mz.121-22.EA10b.bin).

I can pull 12.2(46) IP Services, but when I boot it does not show as EMI

Any help would be great!

*UPDATE* Well it appears I have figured this one out. Apparently, Cisco in all their wisdom decided to change the name of EMI to “IP Services” …so I guess the 12.2(46) IP Services code I got really IS EMI … bah. I wish Cisco would make up their damn mind with these image names. Either change it ALL or don’t change it at all… particuarly irritating is the stuff like ipservicesk9….etc…. wtf do they use “k9” and other codes MIXED with the new names? ugh

Maybe somebody will learn from my mistake:

Switch#sh ver
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 21-Aug-08 16:13 by nachen
Image text-base: 0x00003000, data-base: 0x012B5D98

ROM: Bootstrap program is C3550 boot loader

Switch uptime is 1 minute
System returned to ROM by power-on
System image file is “flash:/c3550-ipservicesk9-mz.122-46.SE.bin”

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco WS-C3550-24-PWR (PowerPC) processor (revision G0) with 65526K/8192K bytes of memory.
Processor board ID CAT0825Z0SD
Last reset from warm-reset
Running Layer2/3 Switching Image

Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces

Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface

Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.
384K bytes of flash-simulated NVRAM.
Base ethernet MAC Address: 00:11:92:1A:1D:80
Motherboard assembly number: 73-8100-08
Power supply part number: 341-0029-03
Motherboard serial number: CAT08240ZQX
Power supply serial number: DTH08201YWD
Model revision number: G0
Motherboard revision number: A0
Model number: WS-C3550-24PWR-SMI
System serial number: CAT0825Z0SD
Configuration register is 0x10F
– Joe

Comments

4 Responses to “Cat 3550: SMI or EMI Image?”

  1. CCIE Journey on September 26th, 2008 11:03 pm

    That is the correct image you have loaded up on the 3550’s. That is what shows for the EMI on those.

    Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SEE4, RELEASE SOFTWARE (fc1)

  2. Kaj on September 27th, 2008 6:06 am

    K9 stands for 3DES/SSH. You can get an ipservices image without it as well. 🙂

  3. Scott on December 8th, 2012 10:26 am

    Joe,

    Just bought a couple of 3550’s. This is the current IOS:

    Cisco Internetwork Operating System Software
    IOS ™ C3550 Software (C3550-I5Q3L2-M), Version 12.1(8)EA1c, RELEASE SOFTWARE (fc1)

    cisco WS-C3550-48 (PowerPC) processor (revision D0) with 65526K/8192K bytes of memory.
    Processor board ID CHK0625V2TY
    Last reset from warm-reset
    Bridging software.
    Running Layer2/3 Switching Image

    Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

    Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces

    Ethernet-controller 3 has 12 Fast Ethernet/IEEE 802.3 interfaces

    Ethernet-controller 4 has 12 Fast Ethernet/IEEE 802.3 interfaces

    Ethernet-controller 5 has 1 Gigabit Ethernet/IEEE 802.3 interface

    Ethernet-controller 6 has 1 Gigabit Ethernet/IEEE 802.3 interface

    48 FastEthernet/IEEE 802.3 interface(s)
    2 Gigabit Ethernet/IEEE 802.3 interface(s)

    The password-recovery mechanism is enabled.
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0A:41:28:27:80
    Motherboard assembly number: 73-5701-06
    Power supply part number: 34-0967-01
    Motherboard serial number: CAT06250KYM
    Power supply serial number: LIT062201TR
    Model revision number: D0
    Motherboard revision number: C0
    Model number: WS-C3550-48-EMI
    System serial number: CHK0625V2TY
    Configuration register is 0x10F

    I’m new at this and just starting to build a home lab for my CCNA training. Should I download/upgrade the same IOS that you mentioned above?

    I have two of these (or will when the 2nd arrives) and have also picked up 2 2620XM With cards WIC 1DSU-T1 V2, WIC 1DSU-T1, WIC 1T (still waiting for them to arrive also).

    Any help would be appreciated.

    Thank you,

    Scott S.
    Ravenna, OH

  4. CCIE Journey on December 8th, 2012 5:39 pm

    I am not sure how much layer 3 switching is on the CCNA, but you will want the EMI image if you can get a hold of it.

Leave a Reply