Simple Redistribution Step-by-Step

We’re going to take our basic topology from the previous post Understanding Redistribution Part I , and configure to provide full connectivity between all devices with the most simple configuration. Then we are going to tweak some settings and see how they affect redistribution and optimal routing. This is going to be an introductory example to illustrate the redistribution control techniques mentioned previously.

First, we configure IGP routing per the diagram, and advertise Loopback0 interfaces (150.X.Y.Y/24, where X is the rack number, and Y is the router number) into IGP. Specifically, R2, R3 and R4 Loopbacks are advertised into OSPF Area 0. R5 and R6 Loopbacks are advertised into EIGRP 356 and R1 Loopback interface is simply advertised into EIGRP 123.

Next, we propose OSPF to be the core routing domain, used as transit path to reach any other domains. All other domains, in effect, will be connected as stub (non-transit) to the core domain. We start with EIGRP 123 and OSPF domains, and enable mutual redistribution between them on R2 and R3 routers:

Full article here